MakerHawk Raspberry Pi UPS Power Supply Uninterruptible UPS HAT 18 650 Battery Charger Power Bank Power Management Expansion Board 5V for Raspberry Pi 4 Model B / 3B + / 3B (Not include battery)
(as of Dec 10,2022 12:50:22 UTC – Details)
Support LED remaining battery prompt
Replaceable battery solution
Extended type C and two USBA port power output
Tap to boot, long press to shut down
Support the charge and discharge power display
Synchronous switch charge and discharge
Built-in power path management, support side-loading
Support load high current line compensation function
Adaptive charge current regulation to match all adapters
Low power consumption
Multiple protection, high reliability
Output overcurrent, overvoltage, short circuit protection
Input overvoltage, overcharge, overdischarge, overcurrent discharge protection
Machine over temperature protection
Please get them from Product guides and documents as follow. Thanks!
1* UPS for Raspberry Pi 4B / 3B+ / 3B
4* M2.5* copper stick
4* M2.5 screws
4* M2.5* long copper stick
4* M2.5 nuts
1* Acrylic shield
[Intelligent Design] UPS for Raspberry PI 4B / 3B+ / 3B. Built-in power path management, support side-loading, load high current line compensation function. There are two USB A port power output, and also adds type C output. It provides uninterruptible power for the Raspberry Pi to make your Raspberry Pi still work while moving, and its design is so smart that you can get rid of troubled of a mass wire.
[LED Power Display] It can use most of the 18 650 batteries and fully comply with the battery characteristics in terms of battery life. The illuminated LED light can quickly show the remain power and support the discharging while charging. You can directly connect to the external power supply for charging. At the same time, the Raspberry Pi will not be turned off.
[Multiple Protection] Support output overcurrent, overvoltage, short circuit protection; input overvoltage, overcharge, overdischarge, overcurrent discharge protection and machine overheat protection. Safe and reliable.
[Use and Note] This product belongs to the power supply device. Please keep it out of the reach of children. Please strictly refer to the instructions for the UPS product, install the battery first, then connect the UPS to the Raspberry Pi. Please do not reverse the battery. If the battery polarity is reversed, it will directly burn the power management chip of the device. Do not add any Components by yourself.
[Package] 1* Raspberry Pi UPS; 4* M2.5* copper stick; 4* M2.5 screws; 4* M2.5* long copper stick; 4* M2.5 nuts; 1* Acrylic shield; 1* Instructions. [100% Satisfaction Warranty] We always bear in mind that your satisfaction is our priority. For any reason you are unsatisfied with our product at any time, just feel free contact support for exchange or refund. Click MakerHawk-US then Ask a question to contact us.